CIP Spray Balls (SBSA)
- Stationary CIP Spray Ball
- Available in 316L Stainless Steel alloy
- Mounted on to process-line tubing
- Available in multiple spray patterns
Polished stainless steel clean-in-place spray balls are used to clean process tanks with a variety of patterns
Sanitary spray balls are specialized cleaning devices used in industries such as food and beverage, pharmaceuticals, and biotechnology to clean and sanitize tanks, vessels, and other equipment in a sanitary and efficient manner. They are designed to ensure that the interior surfaces of these vessels remain free from contamination, residue, and microorganisms.
Tube ends of the spray ball are slightly larger than the noted Tube OD to slip over butt-weld end. A locking pin (included) holds the stationary spray ball in place.
| SPECS | |
 |
3/4" x 2" Spray Ball |
|
1" x 2 1/2" Spray Ball |
|
1 1/2" x 2 1/2" Spray Ball |
|
1 1/2" x 3 1/2" Spray Ball |
|
2" x 2 1/2" Spray Ball |
Part Numbers & Dimensions
| Size(Tube OD) x Ball Size | Spray Pattern | Part Number | Dimensions | |||
| A | B | C | D | |||
| 1" x 2 1/2" | A - 360 Degrees | SBSA-1X25 | 1.109 | 1.031 | 3.500 | 2.500 |
| 1 1/2" x 2 1/2" | A - 360 Degrees | SBSA-15X25 | 1.672 | 1.563 | 3.500 | 2.500 |
| 1 1/2" x 3 1/2" | A - 360 Degrees | SBSA-15X35 | 1.672 | 1.563 | 4.750 | 2.500 |
Additional information
Line Drawings
| SKU | Description | Line Drawing |
|---|---|---|
| SBSA-.75X2-316 | 3/4″ Tube OD x 2″ Slip-On Spray Ball, 360 Pattern |
Request Line Drawing |
| SBSA-1.5X2.5-316 | 1 1/2″ Tube OD x 2 1/2″ Spray Ball, 360 Pattern |
|
| SBSA-1.5X2.5-D | 1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Side |
Request Line Drawing |
| SBSA-1.5X3.5-316 | 1 1/2″ Tube OD x 3 1/2″ Spray Ball, 360 Pattern |
Request Line Drawing |
| SBSA-1.5X3.5-D | 1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Side |
Request Line Drawing |
| SBSA-1X2.5-316 | 1″ Tube OD x 2 1/2″ Spray Ball, 360 Pattern |
Request Line Drawing |
| SBSA-1X2.5-D | 1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Side |
Request Line Drawing |
| SBSA-2X2.5-316 | 2″ Tube OD x 2 1/2″ Slip-On Spray Ball, 360 Pattern |
|
| SBSB-1.5X2.5-316 | 1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Upper |
Request Line Drawing |
| SBSB-1.5X3.5-316 | 1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Upper |
Request Line Drawing |
| SBSB-1X2.5-316 | 1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Upper |
Request Line Drawing |
| SBSC-1.5X2.5-316 | 1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Lower |
Request Line Drawing |
| SBSC-1X2.5-316 | 1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Lower |
Request Line Drawing |
-
What's the finish on your spray balls?
-
Q What's the finish on your spray balls?A The finish on our spray balls is 32Ra.
Do they come in FMPT or MPT?
-
Q Do they come in FMPT or MPT?A These spray balls slide over existing tubing and are secured with a pin. Due to this configuration, we are unable to add any kind of alternative connection to them.
Do you have flow rate/pressure curves for this spray ball?
-
Q Do you have flow rate/pressure curves for this spray ball?A
We do not have flow rate/pressure curves for our spray balls. The typical gallons per minute for these items is 40GPM. The average pressure is around 25PSI.
Do spray balls come with MTRs?
-
Q Do spray balls come with MTRs?A Yes, all of our 316 Stainless Steel fittings come with MTRs as standard.
Are these spray balls 3A certified?
-
Q Are these spray balls 3A certified?A Our spray balls are not manufactured in accordance with 3A Standards.
